Search found 5 matches
- Thu Jan 02, 2014 10:30 pm
- Forum: EIS Sensors
- Topic: Can I used EIS GND Pin 1 as GND for Resistive Fuel Sender?
- Replies: 3
- Views: 10853
Re: Can I used EIS GND Pin 1 as GND for Resistive Fuel Sende
FYI...The resistor limits current flow through sender potentiometer, otherwise it would burn up inside your fuel tank. I put one on each wire per diagram.
- Thu Jan 02, 2014 10:18 pm
- Forum: EIS Sensors
- Topic: Fuel Pressure reading with engine off
- Replies: 3
- Views: 9763
Re: Fuel Pressure reading with engine off
My oil and fuel pres vdo senders both do this, but appear normal when running. Possibly the diaphram/spring/lever/potentiometer thingy is sticking inside.
- Thu Jan 02, 2014 9:45 pm
- Forum: EIS Sensors
- Topic: Manifold pressure
- Replies: 3
- Views: 13484
Re: Manifold pressure
Check for tubing leak.
- Thu Jan 02, 2014 9:34 pm
- Forum: Horizon HX
- Topic: Display Dimming
- Replies: 6
- Views: 13512
Re: Display Dimming
I used window tinting on my HX's to get mine lower than 1 for those occasional night flights. Yes, one level dimmer would be nice.
- Thu Jan 02, 2014 8:58 pm
- Forum: Horizon HX
- Topic: Is 'clock power' required or just desirable?
- Replies: 6
- Views: 14165
Re: Is 'clock power' required or just desirable?
I have a PC 680 aux battery in the back and on my second one in 125 hrs. I have two HX's connected. After 3 -4 weeks of no flying, my aux battery always reads less than 11.5 vdc. I will check amp draw next time at the hangar and disconnect mine too. I also have cabin and glareshield LED dimmers wire...