Page 1 of 1

Tank Level Sensitivity

Posted: Fri Apr 15, 2016 9:10 pm
by Bayou Bert
Jeff had told me one time how to reduce the tank levels moving with every slosh.
It was reducing the update or sensitivity so the levels appear steady.
Does anyone remember how to do that? I'll write it down this time.

Thanks
Bert

Re: Tank Level Sensitivity

Posted: Tue Apr 19, 2016 1:42 am
by GRT_Jeff
Every analog input on the HXr has a digital filter (DF). Go to SET MENU, Display Unit Maintenance, Analog Inputs, and change the Analog Detail to "Raw data and filtering". This will show you all the Digital Filter (DF) settings and allow you to change them like any other setting. DF1 means no filtering. Higher numbers mean more filtering.

Re: Tank Level Sensitivity

Posted: Thu Apr 21, 2016 8:48 pm
by Bayou Bert
Thanks Jeff. When I do that I will see the filter setting by each one?
Adjusting, say left tank, will have no effect on anything else, right?

Thanks
Bert

Re: Tank Level Sensitivity

Posted: Mon Apr 25, 2016 8:48 pm
by GRT_Jeff
Correct. Each input has its own DF# setting that will appear at the right end of the line.