Page 1 of 1

Fuel totalizer fuel remaining - decimal/integer

Posted: Wed Jun 12, 2013 4:03 pm
by glenn
The fuel totalizer fuel remaining displayed on the HXr is an integer but the entered value seems to be decimal. So when I added 35.0 gallons of fuel it is displaying 350 gallons. I can't seem to find the setting to change that on the HXr or the EIS. Does anyone know where that is configured?

Re: Fuel totalizer fuel remaining - decimal/integer

Posted: Tue Jun 18, 2013 1:43 am
by Widget
Look at section 7.1.6 n the EIS installation manual and it shows how to select these.

In the EFIS you can also select digital or Interger. I thinks it's in the General men, but scroll through until you find the AUX settings and you can then select digits or intergers.

Re: Fuel totalizer fuel remaining - decimal/integer

Posted: Wed Jun 19, 2013 1:36 pm
by glenn
Jerry,

Thanks, but that wasn't the problem. However, I did just find what was. The HXr is displaying the Fuel Remaining in a dial. The dial scale was set to 1. I changed it to 0.1 and now it works correctly.

Regards,
Glenn