Login    Register
  • Author
    Message

Analog Config: FAN TACH

Postby bd4c » Sun Dec 03, 2017 2:28 am

I have a fan in the avionics bay which provides a Tach output. This is connected to analog 5 of EFIS #2. What settings would be needed to set this up in the analog settings menu?
bd4c
 
Posts: 28
Joined: Mon Oct 12, 2015 9:00 pm

Re: Analog Config: FAN TACH

Postby GRT_Jeff » Tue Dec 05, 2017 4:40 am

The analog inputs can't read a tach output.
GRT_Jeff
 
Posts: 571
Joined: Tue Dec 11, 2012 12:11 am

Re: Configuration of the TT22

Postby bd4c » Fri Dec 15, 2017 3:37 pm

Fair to assume that AUX3 on the EIS cannot handle this either?
bd4c
 
Posts: 28
Joined: Mon Oct 12, 2015 9:00 pm

Re: Analog Config: FAN TACH

Postby GRT_Jeff » Fri Dec 15, 2017 10:19 pm

It cannot. Only the engine tach inputs on the EIS have the hardware and software necessary to read a tach pulse signal.
GRT_Jeff
 
Posts: 571
Joined: Tue Dec 11, 2012 12:11 am

Return to Horizon HXr

Who is online

Users browsing this forum: No registered users and 3 guests

cron