How can I configure the HXr default startup screen?
Posted: Sun May 19, 2019 8:15 am
After 1,000 hours with 3 HXs, I swapped one out for a larger screen HXr. Very Nice Upgrade!
After 100+ hours on the HXr it would be very desirable for the HXr to startup configured in the same way it was shutdown. Can I do that? How?
That is how my other 2 HX screens function. I setup my HXr screen in one configuration and it never changes, i.e. PFD split. It seems that on at least one occassion it started up in that mode but I don't know why that occurred (if it did). But on every startup, it takes 4-5 button presses to get the screen configured into "PFD split".
Is this possible and supported? Why different than the HX?
After 100+ hours on the HXr it would be very desirable for the HXr to startup configured in the same way it was shutdown. Can I do that? How?
That is how my other 2 HX screens function. I setup my HXr screen in one configuration and it never changes, i.e. PFD split. It seems that on at least one occassion it started up in that mode but I don't know why that occurred (if it did). But on every startup, it takes 4-5 button presses to get the screen configured into "PFD split".
Is this possible and supported? Why different than the HX?