Page 1 of 1

Remote radio control

Posted: Thu Mar 13, 2014 2:36 pm
by Rob Henderson
Since upgrading to V2 I can not change the frequencies of my SL30 from the HXr
Has anyone else found this?

Re: Remote radio control

Posted: Fri Mar 14, 2014 5:13 am
by Rob Henderson
Update; I tried to send nav freq's also,
no joy.
Any Suggestions?

Re: Remote radio control

Posted: Fri Mar 14, 2014 9:07 pm
by GRT_Jeff
It works in testing, and I haven't received any other reports.

Is the SL30 directly connected to this display? Is the SL30 showing up correctly as COM1 and NAV(1) (or COM2 and NAV2) with frequencies showing in the upper right corner of the screen? Are there any other COMs or NAVs? Does the frequency change in the upper right corner? Does it change back to the previous frequency after a few seconds?

Re: Remote radio control

Posted: Fri Mar 14, 2014 11:38 pm
by Rob Henderson
Yes the SL30 is connected to the display com1 and nav1
The display changes on the HXr for a few seconds then changes back.
If I change the freqs on the SL30 the HXr changes
This was working prior to the 2.0 update

Re: Remote radio control

Posted: Sat Mar 15, 2014 7:06 pm
by glenn
Mine works fine with 2.0.

Re: Remote radio control

Posted: Sat Mar 15, 2014 10:26 pm
by Rob Henderson
Update, I re seated the SL30 and all is working well again