If you add a Mini- What will be "Shared" from (and to) the HXr?
I have the following connected to HXr:
Trig T22
ADS-b
VPX
Remote Comm
Autopilot
The question is, which of the above will be controllable (ADS-b just viewable) on the Mini? Is that all over the interlink or do I need additional cabling?
HXr-Mini Interconnect
Re: HXr-Mini Interconnect
Data shared with a Mini over the Display-Unit Link:
(some data may require optional features to work)
GPS data
EIS data
SL30 VOR/ILS data and frequency commands
SL40 frequency commands
ADS-B Traffic (weather does not transfer)
Navigation modes
Lateral/vertical/approach modes
Heading and course selects
Altitude select
Altimeter setting
Fuel Flow Fuel Remaining (when set by user)
Flight Plans and User Waypoints
Remote Analog Inputs from a Horizon
ARINC-429 VOR/ILS and GPS data
Dimmer
For your list:
TT22 - No display or control via the interlink
ADS-B - The highest priority (nearest) 32 traffic reports only, no weather
VP-X - Not supported by the Mini
Remote Comm - Can set frequencies from the nav database, but no display or general controls
Autopilot - Full control of all features the Mini supports: the Mini-AP has full control, the Mini-X doesn't have full vertical control
(some data may require optional features to work)
GPS data
EIS data
SL30 VOR/ILS data and frequency commands
SL40 frequency commands
ADS-B Traffic (weather does not transfer)
Navigation modes
Lateral/vertical/approach modes
Heading and course selects
Altitude select
Altimeter setting
Fuel Flow Fuel Remaining (when set by user)
Flight Plans and User Waypoints
Remote Analog Inputs from a Horizon
ARINC-429 VOR/ILS and GPS data
Dimmer
For your list:
TT22 - No display or control via the interlink
ADS-B - The highest priority (nearest) 32 traffic reports only, no weather
VP-X - Not supported by the Mini
Remote Comm - Can set frequencies from the nav database, but no display or general controls
Autopilot - Full control of all features the Mini supports: the Mini-AP has full control, the Mini-X doesn't have full vertical control