Fuel Qty reading Dial indicator Wrong.

Post Reply
User avatar
Kahuna
Posts: 60
Joined: Sun Dec 09, 2012 3:04 am
Location: Gold Hill, NC NC25
Contact:

Fuel Qty reading Dial indicator Wrong.

Post by Kahuna »

I have finally gotten my capacitive sensors working and now have odd dial readings. The numbers are correct, but you can see from the picture that the dial needles do not represent the number.
Dial #3 set between 1 and 20. changing these numbers does not change anything on the dial at all. Left tank # is 0 which is accurate but needle not at zero. Right tank 9 also accurate but needle at full.
Any idea what this might be? :?
Image
Kahuna
S8 , Team AeroDynamix,
Facebook,Track Me
Gold Hill, NC25
User avatar
Widget
Posts: 31
Joined: Thu Jan 03, 2013 2:29 am
Location: Dahlonega, GA.

Re: Fuel Qty reading Dial indicator Wrong.

Post by Widget »

From where the 0 needle is pointing I would think the digital/integer decimal places may be wrong. I think you can set these to points/ones/tens somewhere in there.
Jerry "Widget" Morris
User avatar
Kahuna
Posts: 60
Joined: Sun Dec 09, 2012 3:04 am
Location: Gold Hill, NC NC25
Contact:

Re: Fuel Qty reading Dial indicator Wrong.

Post by Kahuna »

Well Ill poke around here some more. There are only a few settings for the dial. Ive played with them all. They dont seem to do anything. I played with the dec int values, no change.
Kahuna
S8 , Team AeroDynamix,
Facebook,Track Me
Gold Hill, NC25
GRT_Jeff
Posts: 802
Joined: Tue Dec 11, 2012 12:11 am

Re: Fuel Qty reading Dial indicator Wrong.

Post by GRT_Jeff »

For the "Fuel (Combined)" dial, the fuel maximums can be different from multiple sources, so the scaling comes from the Graph Min and Graph Max settings where the Aux input is configured. The dial settings only control the color bands.
Post Reply