ADS-B Strautx

Post Reply
sonex569
Posts: 3
Joined: Tue Mar 12, 2013 1:58 pm

ADS-B Strautx

Post by sonex569 »

Have a Sport H and building a Stratux which will be serial out (I hope). May I use a banana plug on panel to connect to serial port?
Regards
Dick
Bobturner
Posts: 431
Joined: Mon Mar 11, 2013 6:34 pm

Re: ADS-B Strautx

Post by Bobturner »

Personally I wouldn't use a banana jack, I think after a while they lose their snugness and plugs just fall out. But I think it would work, especially at lower baud rates. Make sure there's a ground return. If the run is more than a couple of feet I'd use shielded cable, but again that may be overkill.
sonex569
Posts: 3
Joined: Tue Mar 12, 2013 1:58 pm

Re: ADS-B Strautx

Post by sonex569 »

Well I might better hard wire it in. Can always pull the pin out of DMB connector.

Regards
Post Reply