Login    Register

Mini X autopilot vertical mode

Discussions and updates about the new Mini EFIS line.
  • Author
    Message

Mini X autopilot vertical mode

Postby ski38off » Mon Apr 02, 2018 2:51 am

How does the mini x handle an altitude change? I fly with an HXr so I know about all the vs modes but I see nothing in the literature describing this in the mini x. Thx, Mike.
ski38off
 
Posts: 9
Joined: Tue Jan 28, 2014 8:23 pm

Re: Mini X autopilot vertical mode

Postby GRT_Jeff » Tue Apr 03, 2018 12:32 am

The Mini-X only has altitude hold mode. If the altitude drifts by more than 150 feet, or if you change the selected altitude by more than 150 feet, it will switch to altitude deviation mode, which is a 300 fpm climb/descent to the selected altitude. (The Mini-AP has the same modes as the HXr.)
GRT_Jeff
 
Posts: 568
Joined: Tue Dec 11, 2012 12:11 am

Re: Mini X autopilot vertical mode

Postby maniago » Tue Apr 03, 2018 9:10 am

Is the difference between the -X and the -AP only a software load? If so, is there an upgrade path or is it a h/w thing? Cost?

Thanks
maniago
 
Posts: 36
Joined: Mon Mar 12, 2018 10:34 pm

Re: Mini X autopilot vertical mode

Postby ski38off » Tue Apr 03, 2018 2:33 pm

I second Maniago's question and will add, could there be a software update that would allow adjusting the 300 FPM value? Maybe in the General Setup page. I understand if the answer is no in order to keep more distinction between the X and AP.
ski38off
 
Posts: 9
Joined: Tue Jan 28, 2014 8:23 pm

Re: Mini X autopilot vertical mode

Postby GRT_Jeff » Wed Apr 04, 2018 1:42 am

For the display unit itself, the difference is software. You can upgrade from an X to an AP with an option code. The AP package includes a magnetometer and OAT probe so when upgrading to the AP package you would get a code and those hardware items.

The 300 fpm climb/descent in the Mini-X is not adjustable since it is only intended to handle deviations of the altitude-hold mode.
GRT_Jeff
 
Posts: 568
Joined: Tue Dec 11, 2012 12:11 am

Return to Mini B/X/AP/GA

Who is online

Users browsing this forum: No registered users and 1 guest

cron