roll servo

Post Reply
Fracrat
Posts: 2
Joined: Tue Apr 30, 2013 7:13 pm

roll servo

Post by Fracrat »

I have installed the roll servo in the right wing. The bellcrank does not fit in between the two mounting brackets. It is tight by about 1/8". Any suggestions. Do I need to modify the bellcrank to fit? Thanks.
Fracrat
Posts: 2
Joined: Tue Apr 30, 2013 7:13 pm

Re: roll servo

Post by Fracrat »

Forgot to add this is in an RV-10.
Post Reply