Sensor value smoothing

Post Reply
Posts: 11
Joined: Sun Jan 10, 2016 7:47 am

Sensor value smoothing

Post by Norcalrv7 »

Is there a way to average out some sensor data? for instance my fuel flow and MAP (therefore %pwr, etc) always seem to be jumping around by .3 or .4

Posts: 660
Joined: Tue Dec 11, 2012 12:11 am

Re: Sensor value smoothing

Post by GRT_Jeff »

The EIS has built-in filtering that isn't adjustable. Fuel Flow can jump around depending on the installation. You can check the EIS troubleshooting guide on the web site for more information. I'm not sure about MAP jumping around by more than .1. If other sensors aren't jumping around, you could check the ground for that sensor and make sure it has good contact.
Post Reply