Page 1 of 1

EIS 4000 /10-180 ohm fuel sender compatability

Posted: Tue Nov 10, 2015 5:24 pm
by wrigh017
The EIS 4000 installation only mentions 240-30 ohm resistive fuel senders. Can the aux inputs for fuel level be made to work with 10-180 ohm senders?

Re: EIS 4000 /10-180 ohm fuel sender compatability

Posted: Wed Nov 11, 2015 1:32 am
by GRT_Jeff
Yes. 10-180 will work the same as 250-30.

Re: EIS 4000 /10-180 ohm fuel sender compatability

Posted: Mon May 10, 2021 8:49 pm
by Ben knox
Will capacitance senders work with eis 4000

Re: EIS 4000 /10-180 ohm fuel sender compatability

Posted: Tue May 11, 2021 4:40 am
by GRT_Jeff
Any sender with a linear output in the 0-5V range will work. The EIS aux inputs are 5V max. A voltage divider could be used if the voltage is higher.