CS-01 or CS-02 physical installation

Post Reply
eschlanser
Posts: 14
Joined: Fri Mar 15, 2013 9:26 pm

CS-01 or CS-02 physical installation

Post by eschlanser »

How does one physically mount the CS-02 or CS-01? I have the CS-02, the small sized one, on a firewall wire. I have run the wire through it OK, but the sensor is awkward to secure. The stem is at a right angle to the hole and I have tied it to nearby wires. Do I use some E6000 and glue the wire going through the opening of the CS-02 to prevent vibration between the wire and the sensor?
Eric
Post Reply