Map Page Setup

Post Reply
Bayou Bert
Posts: 53
Joined: Sat Nov 01, 2014 9:36 am

Map Page Setup

Post by Bayou Bert »

When I go to Map page setup it only gives me two choices for orientation.
I get a choice of Track or Heading. The Map page setup manual says I should have North too.
I am talking about the full page map.
I think I have the latest software version in the EFIS.

Thanks for any advice
Bert
330drvr
Posts: 69
Joined: Sun Mar 24, 2013 5:30 pm

Re: Map Page Setup

Post by 330drvr »

Yes you have the choice of heading or track up displays. The first screen will be the arc display, the second screen the full compass rose display, the third screen will be the HSI display and finally the 4th button push will get you the north up display.
RV-7A
Dual HX, Mini X, dual adaptive AHRS, GRT EIS
Bayou Bert
Posts: 53
Joined: Sat Nov 01, 2014 9:36 am

Re: Map Page Setup

Post by Bayou Bert »

330drvr, thanks for reply. Not sure what button your talking about. The manual said
to go into the setup page and make the choice. Are you saying I can do it from the map page?
My brain won't let me look at a sectional sideways. Any detail would be greatly appreciated.
Home email is bert1950@cox.net if easier.

Thanks
Bert
Bayou Bert
Posts: 53
Joined: Sat Nov 01, 2014 9:36 am

Problem Solved

Post by Bayou Bert »

I went back and spent some time exploring the buttons.
Found what 330drvr was talking about and now all is well.
Thanks for the help 330drvr.

Bert
Post Reply