While at Sun N Fun this year I spoke with someone at the GRT booth about using the EIS6000
that was formerly in a Jabiru 3300 powered aircraft in my Lycoming 0-360 powered RV6A.
Unfortunately I do not remember who it was.(Todd??) If I remember correctly he stated that
I could send the EIS back to GRT for reprogramming to work with the Lycoming. Any idea
what the cost and who I would need to send this to the attention too?
Thanks,
Reprogramming EIS 6000 to EIS 4000
Reprogramming EIS 6000 to EIS 4000
Gene Mohr
SFC(R) US Army
S17 Twin Lakes Airport
SFC(R) US Army
S17 Twin Lakes Airport
Re: Reprogramming EIS 6000 to EIS 4000
Eric is our EIS tech now and he would handle the reprogramming and possible hardware changes. You can get in contact with him through our main support e-mail, support@grtavionics.com.
From Eric:
Serial numbers 19654 and higher would cost $75 for reprogramming/calibration. Serial numbers 19653 and lower would require hardware changes and would cost $225 to reprogram for your Lycoming.
From Eric:
Serial numbers 19654 and higher would cost $75 for reprogramming/calibration. Serial numbers 19653 and lower would require hardware changes and would cost $225 to reprogram for your Lycoming.