Login    Register
  • Author
    Message

X-Plane 11 interface

Postby cofford » Fri Feb 15, 2019 10:24 pm

Hello everyone,

I'm hoping to interface my HXr to X-Plane 11 while my RV-8 is still under construction. I can handle the X-Plane side of things to get any required data out. A few questions:

Are the protocols for AHRS and EIS data available somewhere? I'm assuming I could send GPS data as NMEA0183.

Could GPS, AHRS, and EIS data be sent to the HXr using the interdisplay link only? A single ethernet connection might be easier than configuring multiple serial ports.

Has anyone done this before?

Thanks,
Casey
cofford
 
Posts: 3
Joined: Sat Feb 09, 2019 2:17 am

Re: X-Plane 11 interface

Postby GRT_Jeff » Tue Feb 19, 2019 3:43 am

The AHRS and EIS protocols are available by e-mail. Contact me and I will send them. The GPS inputs can be configured to accept NMEA0183 and Aviation formats.

There isn't a way to send AHRS data to an HXr through the display link, and the display link protocols aren't documented anyway, so you will have to send the data through the serial interfaces.

As far as I know nobody has made an X-Plane interface. Many years ago someone made a Microsoft Flight Simulator interface.
GRT_Jeff
 
Posts: 563
Joined: Tue Dec 11, 2012 12:11 am

Re: X-Plane 11 interface

Postby cofford » Tue Mar 12, 2019 9:00 pm

Success! I've got GPS, AHRS, and EIS working, except for the magnetometer input. I even shot some approaches last night using the Instrument Approach Option. Fun stuff!

Image
cofford
 
Posts: 3
Joined: Sat Feb 09, 2019 2:17 am

Return to Horizon HXr

Who is online

Users browsing this forum: No registered users and 1 guest