Login    Register
  • Author
    Message

Interface

Postby JimB » Thu Mar 28, 2019 12:00 pm

I have a GNS430 connected to my Sport HS using RS232 and ARINC. I'm considering upgrading to a separate GPS (GPS 175) and Nav-Comm (GNC255). With the 430 I use the CDI button to switch between GPS and VORLOC mode. With two independent units how does the EFIS "know" to use the Nav-Comm ARINC data for a ILS rather than the GPS data?

Thanks

Jim Butcher
JimB
 
Posts: 72
Joined: Tue Mar 12, 2013 12:52 am

Re: Interface

Postby Bobturner » Thu Mar 28, 2019 11:01 pm

I have a Horizon but it’s probably the same. Push the right hand button to bring up all the button labels. On the (I think) second from the right button you see labels for VOR-Loc#1, GPS#1, etc. Select the nav source you want. You must have your current setup set to ‘auto switch with Garmin CDI button’ or something like that. You’ll want to turn that off. And you’ll need to identify the new radios as vor#1, gps#1, etc.
Bobturner
 
Posts: 394
Joined: Mon Mar 11, 2013 6:34 pm

Re: Interface

Postby GRT_Jeff » Fri Mar 29, 2019 2:12 am

Change "NAV Mode Source" to "Internal" (General Setup) and you will have separate GPS and NAV selections on your NAV MODE button.

Does the 175 have the same ARINC-429 GAMA 429 interface as the GNS and GTN units?
GRT_Jeff
 
Posts: 563
Joined: Tue Dec 11, 2012 12:11 am

Re: Interface

Postby JimB » Fri Mar 29, 2019 11:13 am

Thanks Jeff.

I haven't seen any install docs so I'm only guessing that ARINC would be the same.

Jim
JimB
 
Posts: 72
Joined: Tue Mar 12, 2013 12:52 am

Return to Sport WS/HS

Who is online

Users browsing this forum: No registered users and 0 guests

cron