Page 1 of 1

Reprogramming EIS 6000 to EIS 4000

Posted: Tue Aug 30, 2016 2:34 pm
by gmohr
While at Sun N Fun this year I spoke with someone at the GRT booth about using the EIS6000
that was formerly in a Jabiru 3300 powered aircraft in my Lycoming 0-360 powered RV6A.
Unfortunately I do not remember who it was.(Todd??) If I remember correctly he stated that
I could send the EIS back to GRT for reprogramming to work with the Lycoming. Any idea
what the cost and who I would need to send this to the attention too?

Thanks,

Re: Reprogramming EIS 6000 to EIS 4000

Posted: Wed Aug 31, 2016 11:48 pm
by GRT_Jeff
Eric is our EIS tech now and he would handle the reprogramming and possible hardware changes. You can get in contact with him through our main support e-mail, support@grtavionics.com.

From Eric:
Serial numbers 19654 and higher would cost $75 for reprogramming/calibration. Serial numbers 19653 and lower would require hardware changes and would cost $225 to reprogram for your Lycoming.