Login    Register
  • Author
    Message

What is the HXr equivalent to the HX’s ‘ARM’ function?

Postby BillinDurham » Fri Dec 07, 2018 9:07 pm

I’ve been fly with several HXs, a G430w and a TruTrak AP. Recently replaced one HX with an HXr. During my initial attempts at flying an LPV approach using the procedures I used on the HX, I am unable to find the ‘ARM’ function or figure out what it’s equivalent is. (I have a call back from tech support requested earlier today)

I had loaded my settings from the HX into the HXr but I’m sensing more than a few differences.

Any help appreciated. Thanks.
Bill Watson
8NC8 Durham, NC
RV10 HX, G430w, NavWorx, EIS
User avatar
BillinDurham
 
Posts: 11
Joined: Sat Mar 16, 2013 10:53 pm

Re: What is the HXr equivalent to the HX’s ‘ARM’ function?

Postby GRT_Jeff » Sat Dec 08, 2018 1:40 am

The first push of the right knob from the PFD main menu gives you the mode functions (and altitude select), including LAT A/P, VERT A/P, and ARM. Unlike the HX which has these on more than one menu, this is the only menu where these functions appear on the HXr.
GRT_Jeff
 
Posts: 544
Joined: Tue Dec 11, 2012 12:11 am

Re: What is the HXr equivalent to the HX’s ‘ARM’ function?

Postby BillinDurham » Sun Dec 09, 2018 6:18 pm

Thanks Jeff. Found it, flew it, all good again.

Lot’s of change in the UI for the former HX user.
Bill Watson
8NC8 Durham, NC
RV10 HX, G430w, NavWorx, EIS
User avatar
BillinDurham
 
Posts: 11
Joined: Sat Mar 16, 2013 10:53 pm

Return to Horizon HXr

Who is online

Users browsing this forum: No registered users and 1 guest

cron