Login    Register
  • Author
    Message

Directing data logging to specific USB drive

Postby bsiusimpex » Thu Aug 01, 2019 10:59 pm

Recently, I installed Seattle Avionics Sectional onto my dual Hx Units (PFD & MFD). Each unit has 2 USB Ports (Say Port 1 & Port 2). I also collect flight data (on all my flights) following GRT's automatic data logging procedures.

Configuration #1:
With the Sectional Data in a Flash Drive in Port 1, and second Flash Drive (for data logging) in Port 2. Sectional Data will display on the EFIS accordingly. However, flight data gets recorded to Flash Drive 1 as well. Nothing on Flash Drive 2.

Configuration #2:
On the other hand, if I reverse the Flash Drive positions (Sectional Data Drive in Port 2 & Data Logging Drive in Port 1), Data Logging still gets written in Port 1, but the EFIS will not find the Sectional Data, thus no Sectional on the EFIS display.

Though Configuration #1 would work, I have to pull out the Flash Drive (where the Sectional Data is residing) to unload my flight data to my computer after each flight. I am hoping I can leave the Sectional Data Drive in place (more permanently) without pulling it out and back in after each flight. Thus posting the question: Is there a way I can direct flight data be recorded to Flash Drive in Position #2?

Thanks!
bsiusimpex
 
Posts: 6
Joined: Tue Jul 24, 2018 2:45 pm

Re: Directing data logging to specific USB drive

Postby GRT_Jeff » Sat Aug 03, 2019 5:51 am

No, our software currently only supports one drive. It will only access the first drive it sees and ignore additional drives.
GRT_Jeff
 
Posts: 571
Joined: Tue Dec 11, 2012 12:11 am

Return to Horizon HX

Who is online

Users browsing this forum: No registered users and 1 guest