GRT Avionics

Thanks, and my apologies ... I did not mean to reference the TT22. I have the FlightBox solution with the serial adapter . I was looking at a separate issue on the TT22 and inadvertently typed that into this thread. Sorry.

From above ... Serial outputs can usually be connected to 2 or 3 serial inputs. ... so I just splice the serial output from the GRT adapter (plugged into the Trig TT22) and connect that to the GRT Mini for the weather? Where does the corresponding Mini serial out go? Spliced into the same serial pai...

One more question...
Since I have HXr with legacy AHRS, which does not provide the AOA port for measured angle of attack, if I get the Mini AP or X with AoA option, it appears I would need to connect the Mini audio out pin 13 to the audio panel for AoA audio alerting? No Interlink function there?

Thank you.

I am considering purchasing a Mini AP to replace a Dynon D10, used as my backup PFD, with an HXr dual AHRS system as primary. Couple questions regarding the Mini AP first: 1. paragraph 2.5 in the mini ap install manual mentions "magnetometer output can be shared..." Does this mean shared o...

I have been flying HXr with legacy dual AHRS with the magnetometer mounted in the left wing tip. This produced satisfactory performance for 275+ hours. During the last couple of flights, I have been getting heading drifts up to +/-50 degrees and gross wind dir & speed errors. Both of these condi...

Please disregard the previous post, I now have this working

... as discussed above in this thread, I have an OpenFlightSolutions FlightBox (similar to the SkyRadar Bob mentions using above) that is providing ADS-B in. The FlightBox is connected to a serial port on the HXr. The TIS and FIS portions of the data are being read and displayed just fine by the HXr...

Hi, I routinely have a discrepancy between the totalizer fuel used and the fuel used that appears in the logbook. The difference hasn't been anything greater than 0.2 gal, so really just an annoyance. Is there an explanation?

Ah, ok. Then since I have the ADS-B in wired to a serial pin, I will attempt to have HXr utilize the GPS portion of that stream through serial, as Bob is doing through his USB. Thanks, that saves me some time.