GRT Avionics

Nice carbon fiber panel

Jim If you release the buttons at the same time it will solve this. as your fingers come off the buttons you are probably changing the contrast and it makes it change color. To update your fuel level without going into the menu press and release the left and right button at the same time. this will ...

very nice.

Jim It is normal to see a small drop in the voltage from buss to FF power output. Due to internal losses through the circuitry It gives you right around 12V when the engine and alternator are running. On the AUX 4,5,6 page. When you have the SF and OFF set to 0 and 0 the aux is looking for a temp se...

The EGTs on an EIS 6000 are arranged out like this cyl 1 cyl 2 cyl 3 cyl 4 cyl 5 cyl 6 This is the way the inputs are arranged. Not necessarily the way that they are wired to the engine. You can use a heat gun to check the arrangement of the cylinders on the eis to make sure they are layed out to ma...

Michael

You can find the frequency information on the flight plan page after selecting the airport or navaid identifier that you are looking for. You can also find them off the map page if you use the right knob to pull up the details for an airport target on the map.

Stump

To upgrade a Sport WS to a SX is $1200 per screen.

We will get that on the website soon.

Yes, upgrading any of the EFIS screens can be upgraded and will still be compatible with the older WS screens.

See you at Oshkosh.

Duane

Are you using gray code? If so there is no gray code output on the HX and HXr systems.
I didn't look but i don't think there is a serial input for the Becker transponder.

The Fuel total bar graph is on the top left corner of the Engine page and it is labeled "Fuel Total". it also will be in the bottom left on the PFD when you have the engine bar across the bottom.