GRT Avionics

It is for the remote page flip analog input function. You can configure an analog input for Page Flip and then use it to change pages with a remote button like some have on their control stick. Normally you would turn on the internal pull-up and then use a momentary switch that grounds the input.

I'm saying the internal one doesn't provide a heading display. The external magnetometer is optional because the AHRS can use GPS track instead and every Mini includes a GPS. Starting with the AHRS hardware in the Mini there have always been two choices for the AHRS heading/track: 1. Magnetic compas...

The internal magnetometer in older Mini displays is for gyro stability only. It does not provide a compass heading. You need an external magnetometer or GPS track with 5+ mph ground speed to get a heading or track display.

On the displays with fewer buttons it was the right knob on the full engine page. When we redesigned the history graph and menus for the HXr and 10.1 we lost that function. I will put this on our to-do list to review.

Yes, the Mini will automatically send the GPS time around once it gets GPS data as long as the receiver is getting satellite signals. The other screens should pick this up as long as they are set to Auto clock mode in SET MENU, General Setup, Clock (this is the default).

The battery backup in the Mini doesn't power the GPS when the EFIS is off. It either powers the whole thing or nothing. The EFIS will only share time from a GPS. If the Mini's GPS is receiving then it will share the time from the GPS. If an EFIS somehow has valid time without any other time inputs t...

It sounds like this Mini had a remote Air Data module connected. If that's not the case anymore you can go to SET MENU, General Setup, and look for a Serial Port Input configured for "GRT Air Data Module" and change that input to Off. Or you can reset all the settings as in the other post....

What??? That suggestion is insane! We wouldn't want to wipe out everyone's settings every time they load an update. Updates maintain previous settings on purpose. If you want to turn off the magnetometer input, you can go to SET MENU, General Setup, and turn off the Serial Port Input and Output that...

4-8 weeks.

Did anyone figure out how to turn off the "Traffic" audio alert? I see that it has no XXXX number associated with it so we cant overwrite it. Its obnoxious!!! To turn it off, go to SET MENU, General Setup, Audio and turn off "Traffic Alerts". We have plans to make the traffic al...