Search found 675 matches

by GRT_Jeff
Thu May 06, 2021 1:44 am
Forum: Horizon HXr
Topic: IFR Databases
Replies: 3
Views: 16

Re: IFR Databases

The procedures need to be updated in the Garmin 175. The Garmin 175 loads the approach, follows the procedures, then computes the deviations and sends the deviation data to the HXr. The HXr displays and follows the deviations and some basic waypoints but it doesn't know anything else about the appro...
by GRT_Jeff
Thu May 06, 2021 1:36 am
Forum: Android App
Topic: GRT Remote app for Android now available!
Replies: 6
Views: 10566

Re: GRT Remote app for Android now available!

Only a few work and it's usually impossible to tell if one will work just by looking at the product. The one we know works is the IOGear GBU521.
by GRT_Jeff
Wed Apr 28, 2021 12:34 am
Forum: ADS-B/Weather/Traffic
Topic: uAvionix EchoUAT/SkyFyx (generic) interface to GRT HX?
Replies: 2
Views: 56

Re: uAvionix EchoUAT/SkyFyx (generic) interface to GRT HX?

The only official way to change anonymous mode is through the echo app so there's no disadvantage for that. Your ADS-B In wiring sounds correct. Configure the EFIS input for 115200 and ADS-B. The EFIS can't send anything directly to the echoUAT except altitude. The echo still needs to get squawk by ...
by GRT_Jeff
Fri Apr 23, 2021 11:13 pm
Forum: EIS Sensors
Topic: TIT sensor wiring
Replies: 3
Views: 136

Re: TIT sensor wiring

Regular Aux inputs can't read a thermocouple. The TIT settings are for modified versions of the EIS hardware that have one or two modified Aux inputs.
by GRT_Jeff
Thu Apr 22, 2021 8:59 am
Forum: EIS Sensors
Topic: TIT sensor wiring
Replies: 3
Views: 136

Re: TIT sensor wiring

Normally a TIT input requires special EIS hardware. What kind of sensor is it?
by GRT_Jeff
Fri Apr 16, 2021 4:20 am
Forum: IFR GPS
Topic: Garmin GPS175
Replies: 6
Views: 1200

Re: Garmin GPS175

Nav EXT1 Label is not used with a GPS175/355/375 because they don't have a VOR/ILS receiver. NAV Mode Source should be Internal.

The EFIS gets the waypoint ID from RS232.
by GRT_Jeff
Fri Apr 16, 2021 4:16 am
Forum: Product Feature Requests
Topic: Flight plan format
Replies: 5
Views: 1398

Re: Flight plan format

No. It looks like trk/trkseg is a generic way to record past positions. It's very close though. If you change trk to rte, remove the trkseg tags, change trkpt to rtept, and remove the type/purpose from the name tags (the name should be just the identifier, "LSGY" not "LSGY,Airport&quo...
by GRT_Jeff
Mon Apr 12, 2021 10:34 pm
Forum: Sport EX/Horizon EX
Topic: Horizon EX sends NAV frequencies to SL30, but won't send COM freqs.
Replies: 1
Views: 97

Re: Horizon EX sends NAV frequencies to SL30, but won't send COM freqs.

"COM1 Device" can't be set to 430W-1 because the EFIS can't control the frequencies of a 430W. This should be set to "None" so the EFIS knows it can't control COM1. With the serial port input and output set to 9600 SL30-2 and the COM2 Device set to SL30-2, sending frequencies sho...
by GRT_Jeff
Mon Apr 12, 2021 10:26 pm
Forum: IFR GPS
Topic: Garmin GPS175
Replies: 6
Views: 1200

Re: Garmin GPS175

I haven't heard of that. I would check the EFIS flight plan page to see if there are extra waypoints it's sending.
by GRT_Jeff
Mon Apr 12, 2021 10:22 pm
Forum: EIS Sensors
Topic: Low oil pressure message while HX displays normal pressure
Replies: 1
Views: 128

Re: Low oil pressure message while HX displays normal pressure

It could be a signal or ground connection issue at the sender. If it happens too fast to catch you may need to try recording it, first with the USB FDL and if that doesn't catch it, the DEMO RECORD function.