GRT Avionics

Ok, so both basically. The 175 to know what to do, and the Seattle charts to display it on the HXr in a meaningful way. Is this correct?

I have my HXr Touch set up with a 175 driving it for IFR. I'm just now in the position to configure the system for IFR training. The question is one of the databases. Do I need both the Seattle Aviation database (IFR) for the HXr and separately the Garmin 175 Nav update (I assume the 175 needs the p...

Thanks Jeff. Is there a relationship between the settings under the DF and accuracy? I got the jitter eliminated and set the offsets to zero out the CTs when not loaded (these CTs are measuring the alternator/generators), but I somewhat doubt the values toward the high end of the reading. For instan...

With only the EFIS and related avionics up, I get a 1 second low amplitude pulse on the intercom. I have the PAC15EX installed. The pulse is not lighting related - its from avionics. I wonder if it is an alarm (but not sure from where). The pulse presents when the engine is not on and power to avion...

I have some CTs attached to both the EFIS and also EIS. The sample rate seems to be around .5s (30hz), more or less. Unfortunately, this means the numbers jump around +/- 3 amps (more or less) all the time. This is quite noisy and distracting. Is there a way to reduce the noise (does not need to be ...

Jeff,

What adapters are supported other than the Hauppauge 610? Pretty much every modern camera is HDMI out. Is there a specific HDMI adapter where the chipset is supported?

Worked. The E-04 was expecting 0183 and the setting change fit the bill. Thx.

Please add to customer feedback for a feature change. Dynon has this feature, and I am sure others as well. To me, this is table stakes.

Table 15: https://dynonavionics.com/public_html/y ... _v15_3.pdf

I have an ACK GPS connected to EFIS PDF 1 (in a two screen system) to EFIS Serial 4 Output. The EIS is using EFIS Serial 4 Input, both at 9600b.

How do I direct NEMA GPS data to output on this port?

Jeff, is there a way to set an audio flap down alarm as speed approaches Vfe? I don't see an obvious setting and I don't see anything in the documentation.