Search found 802 matches
- Fri Oct 31, 2014 6:57 am
- Forum: Sport SX
- Topic: Wind Vector
- Replies: 4
- Views: 9006
Re: Wind Vector
If you don't start at north, the magnetometer calibration function will see that as an additional magnetic field error and try to correct it back, so you will have a constant heading error of a few degrees when you're done. The rate doesn't need to be constant. The AHRS is trying to collect data poi...
- Fri Oct 31, 2014 6:36 am
- Forum: Horizon HXr
- Topic: HXr and Garmin GNC 255A
- Replies: 5
- Views: 12865
Re: HXr and Garmin GNC 255A
The 255 should work just like an SL30, and you shouldn't need the ARINC connection (the SL30 doesn't have ARINC). If you have more than one EFIS screen, do not connect more than one screen output to the 255. An input can only connect to one output.
- Fri Oct 31, 2014 6:24 am
- Forum: ADS-B/Weather/Traffic
- Topic: Trig TT-22 ADSB
- Replies: 10
- Views: 34192
Re: Trig TT-22 ADSB
That kind of pin prevents two transmitters from transmitting at the same time. The receivers don't have a pin for this. Did I miss one of the questions? The EFIS shows all the traffic it gets from all sources at the same time. That means if two sources have the same target, that target will be shown...
- Fri Oct 31, 2014 6:02 am
- Forum: Horizon WS/HS
- Topic: Using the Flight Plan on HWS
- Replies: 1
- Views: 7411
Re: Using the Flight Plan on HWS
The older EFIS models (WS and HS) do not have this function, which is called "Go Direct" in the newer software on the HX, HXr, and SX. In the older software, you would have to switch to direct-to mode to fly to the waypoint, then switch back to the sequence mode and change the leg.
- Fri Oct 31, 2014 5:49 am
- Forum: Horizon HX
- Topic: How to get ADSB GPS position?
- Replies: 3
- Views: 7594
Re: How to get ADSB GPS position?
It should work with any ADS-B receiver that has GPS data and uses the standard ownship message, although we haven't tried it with a Dual. You can check the Own counter in the SET MENU, Display Unit Maintenance, ADS-B Status, Traffic Counters line, to at least see that the message is coming in, altho...
- Sat Oct 18, 2014 5:36 am
- Forum: Mini B/X/AP/GA
- Topic: Mini Panel for Sonex
- Replies: 4
- Views: 9590
Re: Mini Panel for Sonex
1. Two Mini's can talk to each other in the same way that a Mini can talk to another EFIS model. We haven't worked on this configuration, though. A. Yes, the Mini's send SL30 data over the link and read SL30 data from the link. B. Magnetometer data does not go over the link. Each unit would need a m...
- Sat Oct 18, 2014 5:18 am
- Forum: Sport SX
- Topic: Wind Vector
- Replies: 4
- Views: 9006
Re: Wind Vector
The wider dashed lines are +/- 30 degrees, which is a large correction. Large corrections indicate strong interference and possibly a less reliable heading. It will still work if the interference is unchanging. If control movements, turning lights on and off, transmitting on the radio, basically any...
- Sat Oct 18, 2014 4:41 am
- Forum: Horizon HX
- Topic: Fuel Bar Graph Total
- Replies: 1
- Views: 4997
Re: Fuel Bar Graph Total
The combined fuel bar graph only shows whole numbers due to limited space. You would have to configure individual fuel bar graphs in the other bar graph areas to get decimal points.
- Thu Oct 09, 2014 4:19 am
- Forum: Product Feature Requests
- Topic: GPS Navigator?
- Replies: 9
- Views: 23043
Re: GPS Navigator?
We have some remote receiver hardware, but no software yet. Our goal is to have some approach software by the end of the year.
- Thu Oct 09, 2014 4:09 am
- Forum: Android App
- Topic: Linked App View
- Replies: 3
- Views: 11940
Re: Linked App View
With the App? By default a new Bluetooth pairing doesn't have permission to change anything. If you mean a display unit, there are some share functions you can specifically turn off (selected heading, selected courses, NAV MODE), but everything else still works. With the display link on a serial por...