Search found 60 matches

by Kahuna
Fri Jan 11, 2013 6:55 pm
Forum: EIS Sensors
Topic: Princeton Capacitive fuel probe programming / calibration
Replies: 11
Views: 35588

Re: Princeton Capacitive fuel probe programming / calibratio

Perfect. Thanks Ben. That did the trick. You should consider throwing this in the manual somewhere.
Thanks for responding. Love this forum!
by Kahuna
Fri Jan 11, 2013 4:08 pm
Forum: EIS Sensors
Topic: Princeton Capacitive fuel probe programming / calibration
Replies: 11
Views: 35588

Re: Princeton Capacitive fuel probe programming / calibratio

I have just completed an install of the 5 set point princeton sensors. I also ran the calibration routine. I have plates in the tanks.
Can you tell me what offset points I need to program in please?
Thanks
by Kahuna
Sat Jan 05, 2013 9:48 am
Forum: Horizon HX
Topic: NMEA GPS input not giving waypoint destination
Replies: 4
Views: 7952

Re: NMEA GPS input not giving waypoint destination

Jeff, Very key points in here. 4800, GPS2 external and vert gps off. I ALSO had to turn GPS 1 from ext to internal. If there is an external 1 and 2, with ext 1 powered off(this is my 430), I never see any ext 2 in the flight plan. If I go change the setting of GPS 1 from external to internal, I see ...
by Kahuna
Wed Jan 02, 2013 4:30 pm
Forum: Show Us Your Panel
Topic: N687MS RV Super 8 Panel Team AeroDynamix
Replies: 6
Views: 14439

N687MS RV Super 8 Panel Team AeroDynamix

Man do I love my GRT screens. I have been using GRT EFIS and products since 2005. Thats a pretty long relationship. Recently I removed my AFS 2500 engine monitor and installed the GRT EIS. This freed up panel space big time. Also I installed servos for pitch and roll and removed my Trio Avionics aut...
by Kahuna
Mon Dec 24, 2012 4:42 pm
Forum: EIS Sensors
Topic: Princeton Capacitive fuel probe programming / calibration
Replies: 11
Views: 35588

Princeton Capacitive fuel probe programming / calibration

It took me a while to find the document for programming so I thought I would post it up. This is for the 2 set point version and the 5 set point version.
See attached pdf document for instructions.
Image
by Kahuna
Mon Dec 24, 2012 4:05 pm
Forum: Forum Rules, Read Before Posting, Posting Pics
Topic: How do you post pictures to these forums
Replies: 0
Views: 14005

How do you post pictures to these forums

Its pretty easy to post pictures to these forums. Pictures can tell a thousand words. We do not allow direct posting of pictures to the forums but you can insert an image link that points to a third party hosting site. There are a gazillion 3rd party hosting sites. we recommend http://www.TinyPic.co...
by Kahuna
Sun Dec 23, 2012 2:54 pm
Forum: Horizon HX
Topic: NMEA GPS input not giving waypoint destination
Replies: 4
Views: 7952

NMEA GPS input not giving waypoint destination

I have a new 796 install. NMEA out from 796 to EFIS (Serial 2 GPS2 NMEA). The EFIS is using the information from the 796 (GPS position) since my GRT map works (I do not have an internal GRT GPS) but for some reason the waypoint selected on the 796 does not become my waypoint destination on my GRT. I...
by Kahuna
Wed Dec 19, 2012 12:08 pm
Forum: EIS Programming
Topic: Calibrating Fuel Levels
Replies: 1
Views: 6782

Calibrating Fuel Levels

Looking for instructions on calibrating the fuel levels on the EIS on the aux inputs. You have something like that around? The EIS manual tells us to use the SF and Off #'s that came with the device, but of course this is not the case for the fuel tanks. I tried a buddies numbers to start with, but ...
by Kahuna
Sun Dec 16, 2012 1:57 pm
Forum: Show Us Your Wiring Diagrams
Topic: N687MS RV Super 8 wiring diagrams
Replies: 0
Views: 5523

N687MS RV Super 8 wiring diagrams

I did all my diagrams in Visio. I had experience with it so it was the simplest to implement. All of my diagrams are available on-line http://mstewart.net/super8/visio/n687msvisio_files.htm for your viewing pleasure web enabled. I keep them on-line just in case I ever need them on the road. Also if ...
by Kahuna
Sun Dec 09, 2012 7:46 pm
Forum: Electrical Systems
Topic: Forum Rules. Read before posting
Replies: 0
Views: 89668

Forum Rules. Read before posting

Please abide by the following extremely reasonable rules if you intend to post in the forums. We are glad your here and we want you to have the best experience possible. :D These Forums are for the discussion of GRT Products. Only registered users are allowed to post. No Spam / Advertising: :evil: ...