Search found 51 matches
- Tue May 07, 2013 1:06 pm
- Forum: EIS Installation
- Topic: Current Sensor Install...
- Replies: 2
- Views: 6170
Re: Current Sensor Install...
I doesn't matter the exact location of the wire in the sensor.
- Mon Apr 29, 2013 12:34 pm
- Forum: Product Feature Requests
- Topic: Sport SX support for Bluetooth
- Replies: 2
- Views: 5908
Re: Sport SX support for Bluetooth
Sport support for the bluetooth connectivity is on the slate to be worked on. It will be added in the future.
- Mon Apr 29, 2013 12:32 pm
- Forum: EIS Sensors
- Topic: Can an AUX input be put on a switch? (CS-01, CS-02)
- Replies: 4
- Views: 13333
Re: Can an AUX input be put on a switch? (CS-01, CS-02)
Yes you can use an aux with a switch BUT, you have to have an aux that has the same scale factor and offset settings or one of them will read incorrectly. if you had two CS-01's or two CS-02's it would work because the settings are the same but you cant mix and match.
- Mon Apr 29, 2013 12:29 pm
- Forum: EIS Sensors
- Topic: Fuel Pressure reading with engine off
- Replies: 3
- Views: 9735
Re: Fuel Pressure reading with engine off
Could be left over pressure. When you first installed the system with no fuel in the lines what did the pressure read?
- Mon Apr 29, 2013 12:26 pm
- Forum: ADS-B/Weather/Traffic
- Topic: Sky radar D2 GPS?
- Replies: 8
- Views: 20591
Re: Sky radar D2 GPS?
The sky radars GPS signal is not used by the GRT systems at this time.
- Tue Apr 23, 2013 12:46 pm
- Forum: EIS Installation
- Topic: Female D-sub Pin Out
- Replies: 5
- Views: 16447
Re: Female D-sub Pin Out
Yellow wire with the blue stripe is for the fuel flow return.
- Mon Apr 22, 2013 12:50 pm
- Forum: Electrical Systems
- Topic: GRT backup battery mounting limitations?
- Replies: 1
- Views: 11075
Re: GRT backup battery mounting limitations?
There are no limitations on the installation of the backup battery
- Mon Apr 22, 2013 12:47 pm
- Forum: Sport SX
- Topic: Upgrade my current Sport or go to HX?
- Replies: 3
- Views: 8145
Re: Upgrade my current Sport or go to HX?
The costs can be found on the website for the different upgrade you can choose from. http://grtavionics.com/Upgrades%20Fixed.pdf The benefits that you would see depend on the type of flying you do with your plane. With the HX having the 30 mile synthetic vision is nice when you are doing a lot of mo...
- Mon Apr 08, 2013 8:37 pm
- Forum: Horizon HX
- Topic: HX: Page Flip...how to wire?
- Replies: 2
- Views: 5884
Re: HX: Page Flip...how to wire?
Howard
The resistor and the "excitation" are a selectable and internal efis setup selection. you will not need to so any wiring for them just connect the wire and then turn on the selection in the general setup menu when you do your programming.
The resistor and the "excitation" are a selectable and internal efis setup selection. you will not need to so any wiring for them just connect the wire and then turn on the selection in the general setup menu when you do your programming.
- Fri Apr 05, 2013 12:42 pm
- Forum: EIS Installation
- Topic: single OAT probe for 2 boxes?
- Replies: 1
- Views: 5371
Re: single OAT probe for 2 boxes?
Jeff
You only need to run the wires for the OAT to the EIS. Then the temp data will be carried through the serial interface to the EFIS screens. The screens can then do their work for TAS and other functions.
You only need to run the wires for the OAT to the EIS. Then the temp data will be carried through the serial interface to the EFIS screens. The screens can then do their work for TAS and other functions.