Loading new software

Discussions and updates about the new Mini EFIS line.
Post Reply
STEVEC
Posts: 4
Joined: Thu Oct 20, 2016 2:19 am
Location: Auckland, New Zealand

Loading new software

Post by STEVEC »

Hi

I have just attempted to do an update the software on my Mini X. I was unable to find any Load options under the AHRS Maintenance menu. Have they been moved elsewhere. I made the obvious error and allowed the MiniUp-2.dat file to remain so have renamed that and will do the update next hanger visit.

My software levels at the moment are
Display 4.03
AHRS 61

Battery and Air Data levels I can't find anywhere.

Any help would be much appreciated
Rgds Steve
GRT_Jeff
Posts: 802
Joined: Tue Dec 11, 2012 12:11 am

Re: Loading new software

Post by GRT_Jeff »

The Load AHRS Software function has not been moved. It is still in AHRS Maintenance near the end, before the Air Data (AD) lines. The Air Data version and update function is also there at the end but it's unlikely you need to update it. There haven't been any air data updates in a few years. The Battery version and update is in SET MENU, Display Unit Maintenance, Battery Status. If you see Battery software version 5 an update is recommended.
STEVEC
Posts: 4
Joined: Thu Oct 20, 2016 2:19 am
Location: Auckland, New Zealand

Re: Loading new software

Post by STEVEC »

Thanks I will look a bit harder

Steve
STEVEC
Posts: 4
Joined: Thu Oct 20, 2016 2:19 am
Location: Auckland, New Zealand

Re: Loading new software

Post by STEVEC »

Hi

I have solved the mystery of the missing menu options. I have found that if I turn the selector knob slowly the menu stops at the magnetometer options but if I turn it rapidly more options appear. Found what I needed and all updates complete.

Thanks
Steve
Post Reply