Mini-AP SerialPort 3?

Discussions and updates about the new Mini EFIS line.
Post Reply
MolsonB
Posts: 84
Joined: Fri Apr 10, 2015 1:53 am

Mini-AP SerialPort 3?

Post by MolsonB »

I noticed in the Mini-AP, there is a 3rd serial port showing up. But can't find any documentation on the pins.?
GRT_Jeff
Posts: 680
Joined: Tue Dec 11, 2012 12:11 am

Re: Mini-AP SerialPort 3?

Post by GRT_Jeff »

It is the recommended port for the magnetometer. It is also a general purpose serial port. This is documented in the Mini-X manual. Pin 9 is Serial Port 3 Output and pin 10 is Serial Port 3 Input.
MolsonB
Posts: 84
Joined: Fri Apr 10, 2015 1:53 am

Re: Mini-AP SerialPort 3?

Post by MolsonB »

GRT_Jeff wrote:It is the recommended port for the magnetometer. It is also a general purpose serial port. This is documented in the Mini-X manual. Pin 9 is Serial Port 3 Output and pin 10 is Serial Port 3 Input.
AH okay. I see the option for Magnetometer connected to Yes. Figured it would 'grey' out Serial Port 3 afterwards.
Post Reply