Reprogramming EIS 6000 to EIS 4000

Post Reply
gmohr
Posts: 18
Joined: Sun Apr 14, 2013 5:50 pm
Location: Trenton, SC
Contact:

Reprogramming EIS 6000 to EIS 4000

Post by gmohr »

While at Sun N Fun this year I spoke with someone at the GRT booth about using the EIS6000
that was formerly in a Jabiru 3300 powered aircraft in my Lycoming 0-360 powered RV6A.
Unfortunately I do not remember who it was.(Todd??) If I remember correctly he stated that
I could send the EIS back to GRT for reprogramming to work with the Lycoming. Any idea
what the cost and who I would need to send this to the attention too?

Thanks,
Gene Mohr
SFC(R) US Army
S17 Twin Lakes Airport
GRT_Jeff
Posts: 802
Joined: Tue Dec 11, 2012 12:11 am

Re: Reprogramming EIS 6000 to EIS 4000

Post by GRT_Jeff »

Eric is our EIS tech now and he would handle the reprogramming and possible hardware changes. You can get in contact with him through our main support e-mail, support@grtavionics.com.

From Eric:
Serial numbers 19654 and higher would cost $75 for reprogramming/calibration. Serial numbers 19653 and lower would require hardware changes and would cost $225 to reprogram for your Lycoming.
Post Reply