EIS 4000 /10-180 ohm fuel sender compatability

Post Reply
wrigh017
Posts: 1
Joined: Tue Nov 10, 2015 5:15 pm

EIS 4000 /10-180 ohm fuel sender compatability

Post by wrigh017 »

The EIS 4000 installation only mentions 240-30 ohm resistive fuel senders. Can the aux inputs for fuel level be made to work with 10-180 ohm senders?
GRT_Jeff
Posts: 680
Joined: Tue Dec 11, 2012 12:11 am

Re: EIS 4000 /10-180 ohm fuel sender compatability

Post by GRT_Jeff »

Yes. 10-180 will work the same as 250-30.
Ben knox
Posts: 2
Joined: Sat Apr 17, 2021 12:22 am

Re: EIS 4000 /10-180 ohm fuel sender compatability

Post by Ben knox »

Will capacitance senders work with eis 4000
GRT_Jeff
Posts: 680
Joined: Tue Dec 11, 2012 12:11 am

Re: EIS 4000 /10-180 ohm fuel sender compatability

Post by GRT_Jeff »

Any sender with a linear output in the 0-5V range will work. The EIS aux inputs are 5V max. A voltage divider could be used if the voltage is higher.
Post Reply