Analog Config: FAN TACH
Analog Config: FAN TACH
I have a fan in the avionics bay which provides a Tach output. This is connected to analog 5 of EFIS #2. What settings would be needed to set this up in the analog settings menu?
Re: Analog Config: FAN TACH
The analog inputs can't read a tach output.
Re: Configuration of the TT22
Fair to assume that AUX3 on the EIS cannot handle this either?
Re: Analog Config: FAN TACH
It cannot. Only the engine tach inputs on the EIS have the hardware and software necessary to read a tach pulse signal.