Getting GNS 480 to receive fuel flow
Posted: Fri Jul 07, 2017 3:28 pm
I have a dual HX and a GNS 480 install. I can't get the fuel flow to appear on the 480. All the info is on the EFIS so I don't really need it but it bugs me that I can't get it over to the 480.
Serial output from the HX is fuel/air data Z format at 9600 baud (although I have also tried the S and D formats as well.)
Serial input on the 480 is FADC at 9600 baud. Output is Mapcom.
ARINC 429 is set at low.
480 input #2 is EFIS
480 outputs are VOR/ILS and GAMA 429
Not the most critical but if anyone knows what I am doing wrong, I would love to hear it. Thanks
Serial output from the HX is fuel/air data Z format at 9600 baud (although I have also tried the S and D formats as well.)
Serial input on the 480 is FADC at 9600 baud. Output is Mapcom.
ARINC 429 is set at low.
480 input #2 is EFIS
480 outputs are VOR/ILS and GAMA 429
Not the most critical but if anyone knows what I am doing wrong, I would love to hear it. Thanks