Login    Register

Loading new software

Discussions and updates about the new Mini EFIS line.
  • Author
    Message

Loading new software

Postby STEVEC » Tue Jun 26, 2018 1:28 am

Hi

I have just attempted to do an update the software on my Mini X. I was unable to find any Load options under the AHRS Maintenance menu. Have they been moved elsewhere. I made the obvious error and allowed the MiniUp-2.dat file to remain so have renamed that and will do the update next hanger visit.

My software levels at the moment are
Display 4.03
AHRS 61

Battery and Air Data levels I can't find anywhere.

Any help would be much appreciated
Rgds Steve
STEVEC
 
Posts: 4
Joined: Thu Oct 20, 2016 2:19 am
Location: Auckland, New Zealand

Re: Loading new software

Postby GRT_Jeff » Tue Jun 26, 2018 2:09 am

The Load AHRS Software function has not been moved. It is still in AHRS Maintenance near the end, before the Air Data (AD) lines. The Air Data version and update function is also there at the end but it's unlikely you need to update it. There haven't been any air data updates in a few years. The Battery version and update is in SET MENU, Display Unit Maintenance, Battery Status. If you see Battery software version 5 an update is recommended.
GRT_Jeff
 
Posts: 572
Joined: Tue Dec 11, 2012 12:11 am

Re: Loading new software

Postby STEVEC » Tue Jun 26, 2018 8:54 pm

Thanks I will look a bit harder

Steve
STEVEC
 
Posts: 4
Joined: Thu Oct 20, 2016 2:19 am
Location: Auckland, New Zealand

Re: Loading new software

Postby STEVEC » Wed Jun 27, 2018 7:49 pm

Hi

I have solved the mystery of the missing menu options. I have found that if I turn the selector knob slowly the menu stops at the magnetometer options but if I turn it rapidly more options appear. Found what I needed and all updates complete.

Thanks
Steve
STEVEC
 
Posts: 4
Joined: Thu Oct 20, 2016 2:19 am
Location: Auckland, New Zealand

Return to Mini B/X/AP/GA

Who is online

Users browsing this forum: No registered users and 0 guests

cron